Fronius FK 5000, Руководство по эксплуатации

Страница: 21 / 60

21
EN
General
Device concept
The cooling unit fits perfectly into the modu -
lar product design of the TransSteel power
sources.
The cooling unit and power source together
form a unit. As with the standalone power
source, the power source/cooling unit com -
bination can be mounted on the trolley.
Variants Two versions of the cooling unit are available:
- FK 5000 (basic version)
- FK 5000 MV (Multivoltage version)
The FK 5000 MV adapts itself automatically to the mains voltage. The Multivoltage version
is available only from the factory.
Scope of supply The scope of supply comprises:
- Cooling unit
- 5 l coolant in a canister
- Four 5x25mm self-tapping screws
- Operating instructions
Field of applica -
tion
The cooling unit can be used for:
- water-cooled MIG/MAG manual welding torches
Validity of "Gen -
eral Delivery and
Payment Condi -
tions"
With regard to cooling units, the "General Delivery and Payment Conditions" according to
the price list only apply under the following conditions:
- Max. 8 hrs/day operation (single shift operation)
- Only original coolant from the manufacturer is used
- Regular maintenance and regular change of coolant
Service life of the
coolant pump
NOTE!
If used properly the coolant pump will have a service life of approx. 10,000 operating
hours. After the end of its nominal service life, the coolant pump may develop a fault.
To avoid a lengthy period of work disruption, the pump should be scheduled for re -
placement after approx. 10,000 operating hours.