Fronius Energy Package, Руководство по эксплуатации, Страница: 61 / 148

- The inverter switches from wherever it is on the menu level back to the
"NOW" display mode (exception: "Standby" Setup menu item).
- The display backlighting goes out.
- The current power of feeding in is displayed.
Setting menu
entries, general
1
Open the desired menu
2
Use the 'Up' or 'Down' keys to select the desired menu item
3 Press "Enter"
The available settings are displayed: The first digit of a value to be set
flashes:
4
Use the 'Up' or 'Down' buttons to
select the desired setting
5
Press the 'Enter' key to save and
apply the setting.
To discard the setting, press the
'Esc' key.
4
Use the 'Up' or 'Down' keys to se-
lect a value for the first digit
5
Press "Enter"
The second digit of the value flashes.
6
Repeat steps 4 and 5 until ...
the whole value to be set flashes.
7
Press "Enter"
8
Repeat steps 4 - 6 as required for
units or other values that are to
be set until the appropriate unit
or the value flashes.
9
Press the 'Enter' key to save and
apply the changes.
To discard the changes, press the
'Esc' key.
The currently selected menu item is
displayed. The currently selected menu item is
displayed.
Application ex-
ample: Setting
the time
Relay
Standby
Relay
Clock
Display Setting
Energy Yield
1
Select “Time / Date” from the
Setup menu.
2
Press the “Enter” key.
61
EN