Fronius Energy Package, Руководство по эксплуатации, Страница: 57 / 148

When choosing the switch-off point, the power consumption of the connected
load should be taken into account.
When choosing the switch-on point, the weather conditions and anticipated in-
solation should also be taken into account.
Application example
Switch-on point = 2000 W, switch-off point = 1800 W
If the inverter is outputting 2000 W or above, then the floating switch contact on
the inverter is switched on.
If the inverter output falls to below 1800 W, the floating switch contact is
switched off.
Possible applications:
Operating a heat pump or an air-conditioning system using as much self-gener-
ated power as possible
Time / Date Set the time, date and automatic changeover between summer and winter time
Setting range Set time / Set date / Time display format / Date display
format / Summer/winter time
Set time
Set the time (hh:mm:ss or hh:mm am/pm – depending on the setting for the time
display format)
Set date
Set the date (dd.mm.yyyy or mm/dd/yyyy - depending on the setting for the date
display format)
Time display format
For specifying the time display format
Setting range 12hrs / 24hrs
Factory setting Depends on country setup
Date display format
For specifying the date display format
Setting range mm/dd/yyyy / dd.mm.yy
Factory setting Depends on country setup
Summer/winter time
Activate/deactivate automatic changeover between summer and winter time
Setting range on / off
Factory setting on
IMPORTANT! The time and date must be set accurately in order for the day and
year values and for the day characteristic to be displayed correctly.
57
EN