Fronius Datamanager 2.0, Руководство по эксплуатации

Страница: 65 / 88

Settings – Passwords
General Access to Fronius Datamanager 2.0 is regulated by assigning passwords.
Three different password types are available:
-
the administrator password
- the service password
- the user password
Passwords Administrator Password
User name = admin
The administrator password set during commissioning assigns the user read and write
(configuration) access. The user can then open the “Settings” menu item and define any
settings as desired, with the exception of the UC Editor and Meter.
When an administrator password is set, the user must enter the user name and pass-
word to open the “Settings” menu item.
Service Password
User name = service
The service password is usually assigned in the Commissioning Wizard by the service
technician or system installer and provides access to system-specific parameters. The
service password is required to adjust meter settings and settings in the UC Editor. If no
service password has been assigned, the Meter and UC Editor menu items cannot be
accessed.
User Password
After activating the “ Save local site page ” selection field, the user password is dis-
played; user name = user.
An assigned user password gives the user read access only. The user cannot open the
“Settings” menu item.
When assigning a user password, users must enter their username and password every
time they connect.
65
EN-US