6.2 Adjust Filling Area to Loading Vehicle
The front part of the bulk chute is adjustable, which means that it can be quickly
adapted to the sill of the loading vehicle.
❒ Loosen the screw connections to the left and right on the inlet plate
❒ Move the inlet plate into the required position according to the loading height
necessary
❒ Fix in position with the screw connections
6.3 Adjust the feed output to the fuel
The inlet area is equipped with adjustable cover plates to regulate the fuel feed in the
bulk chute. Depending on the material used, they can be adjusted in three stages as
required. It is recommended starting with Stage 1 and then increasing the inlet area if
needed:
G
5
0
Cover plate adjustment
G
3
0
C
o
a
rs
e
w
o
o
d
c
h
ip
s
F
in
e
w
o
o
d
c
h
ip
s
A 1339 00 12
STAGE 1
STAGE 2
STAGE 3
Adjust cover plates:
❒ Remove bolts from cover plate
❒ Move cover plate into the required position and with fix with bolts
Operating the System
6
Adjust Filling Area to Loading Vehicle
Installation- and Operating Intructions BFSV / BFSU | M1420116_en
43
