Fritz! POWERLINE 546E, Подключение и эксплуатация

Страница: 43 / 51

Using FRITZ!Powerline with Cross Blocking in the Power Supply
FRITZ!Powerline 546E 43
20.3 Using FRITZ!Powerline with Cross Blocking in the Power Supply
Home networking with FRITZ!Powerline is possible even when
the FRITZ!Powerline adapters are used in different phases
(phase conductors) of the home’s own electrical wiring.
FRITZ!Powerline sends (“modulates”) the network data to the
electrical wiring as high-frequency signals. This results in
“crosstalk” of the powerline signal from one phase to the oth-
er as soon as the phase conductors run in close parallel over
a distance of at least 0.5 meters. Since this is the case in al-
most all buildings, FRITZ!Powerline can also be used across
different phases.
20.4 Up to Four Powerline Networks in a Circuit
Up to four FRITZ!Powerline networks can be set up within a
single circuit.
By using different network passwords you can ensure that the
participants in the individual networks can communicate
safely, and that the networks do not interfere with each other.