FRITZ!Powerline 546E
40
Loading Factory Settings
18
Loading Factory Settings
The factory settings can be restored in the user interface or
using the buttons.
FRITZ!Powerline has the following settings upon delivery:
•
The “Powerline bridge” operating mode is preset.
•
The IP address 192.168.178.2 is preconfigured.
•
The DHCP server of FRITZ!Powerline is switched on by de-
fault.
•
Wireless LAN is enabled.
•
FRITZ!Powerline has a wireless network name and its
own network key.
•
The socket is switched off.
18.1
Restoring Factory Settings in the User Interface
1.
Open the FRITZ!Powerline user interface (see
).
2.
Select “System / Backup”.
3.
Click the “Factory Settings” tab.
4.
Click the “Load Factory Settings” button.
FRITZ!Powerline loads the factory settings and restarts.
18.2
Loading the Factory Settings Using the Buttons
Press the buttons “On/Off” and “Powerline • Security”
at the same time and hold them down for 10 seconds.
FRITZ!Powerline loads the factory settings and restarts.
Содержание POWERLINE 546E
Страница 5: ...FRITZ Powerline 546E 5 Index 50 ...