Call Waiting
FRITZ!Box Fon ata – 7 Configuration and Operation by Telephone
73
Enabling Connected Line Identification Presentation
Permanently
To permanently enable transmission of the connected line’s
number (COLP), proceed as follows:
Call Waiting
Activate the “Call Waiting” feature to be notified during a call
if a second caller is dialing your line. An acoustic signal in
your telephone handset notifies you that a second call is
waiting. You can accept the connection with the new caller
within 30 seconds. If you ignore the signal, the waiting call is
rejected after 30 seconds.
For instructions on how to turn the “Call Waiting” function on
and off, see the section “Disabling Call Waiting” on page 59.
N
Pick up the handset.
r53
Ext.
s0s
Dial the sequence shown at left to
enable transmission of the connect-
ed line number. Type in the number
of the extension in the “Ext.” field.
r91ss
Save your settings if desired by dial-
ing the sequence shown at left.
O
Hang up the handset.
R2
To accept a waiting call, dial the sequence shown at
left. Your original call is now on hold.
R1
To return to your original connection, dial the se-
quence shown at left. You can also accept to the wait-
ing call by hanging up your existing connection, i.e.,
by hanging up the handset. In this case the phone
rings as soon as you have hung up. Pick up the hand-
set again to accept the waiting call.
R0
To reject a waiting call, dial the sequence shown at
left.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
