42
Configuring an Internet Connection Automatically over DSL
or “autoprovisioning”), we recommend always set-
ting up the Internet connection of your FRITZ!Box in
this way.
The FRITZ!Box then is set up automatically and se-
curely, with the data necessary for Internet use and
any other services ordered from your provider, like In-
ternet telephony.
•
If you would like to use not only DSL, but also
UMTS/HSPA for Internet connections, note that the
Internet connection can be used by only
one
of these
access technologies. You will have to change the type
of access in the FRITZ!Box as needed.
Remember that you can configure in the FRITZ!Box
only those types of Internet access you have contract-
ed with the appropriate providers.
6.1
Configuring an Internet Connection Automatically over DSL
Automatic configuration is a procedure in which the Inter-
net Service Provider sets up the Internet connection of
your FRITZ!Box completely automatically by “Plug & Play”.
Prerequisites
In order for you to be able to perform automatic configura-
tion, the following requirements must be met:
•
Your FRITZ!Box is brand new and starting operation
for the first time
or
The factory settings were restored to your existing
FRITZ!Box (see page 71) and the Internet connection
has to be set up again.
•
The provider you contracted your Internet connection
from supports automatic configuration.
If these prerequisites are not fulfilled, you can set up your
FRITZ!Box using the Configuration Wizard (see page 44).
Follow all of the information you received from your pro-
vider on configuring your Internet connection!
