Enabling DECT Eco
FRITZ!Box 7272
133
17.4
Enabling DECT Eco
DECT Eco allows DECT radio transmission to be switched off
during standby operation.
How Does DECT Eco Work?
When all registered cordless telephones are in standby oper-
ation, the DECT radio transmission of the FRITZ!Box and the
telephones is switched off.
When a call arrives or you press a key on a cordless telephone,
the FRITZ!Box switches DECT radio transmission back on.
Standby operation of a cordless telephone:
•
You are not making any calls.
•
You are not using any other telephone functions.
•
You are not pressing any keys on the telephone.
Requirements
•
In the FRITZ!Box user interface (see
), the option
“DECT Eco supported” must be displayed for each cord-
less telephone under “DECT / DECT Monitor”.
•
The FRITZ!Box must be configured as a DECT base sta-
tion: The setting “DECT enabled” must be enabled under
“DECT / Base Station” in the user interface.
•
The following devices may
not be registered with the
FRITZ!Box
: FRITZ!DECT 200, FRITZ!DECT Repeater,
FRITZ!Box in DECT repeater mode.
Enabling DECT Eco in the FRITZ!Box
1.
Open the FRITZ!Box user interface; see
.
2.
Select the “DECT / Base Station” menu.
3.
Enable the “DECT Eco” option and define when DECT Eco
should be active.
4.
Click the “Apply” button to save the settings.
5.
Register all of the cordless telephones on the FRITZ!Box
again.
DECT Eco is enabled.