Fritz! Box 3370, Инструкция по установке и эксплуатации

Страница: 21 / 144

Connecting Computers Wirelessly over WLAN
FRITZ!Box 3370 21
WPS with the Push-button Method
The push-button method (WPS PBC) can be used if your WLAN
device is equipped with a WPS button, or if WPS can be en-
abled via the control software of the WLAN device.
1. Press the “WLAN” button on the FRITZ!Box until the
“WLAN” LED begins flashing.
2. When the “WLAN” flashes, start WPS on the WLAN de-
vice. You have 2 minutes for this task.
How to start WPS depends on the WLAN device. Either
press a button on the WLAN device, or start WPS in the
control software of the WLAN device.
The connection between the FRITZ!Box and the computer is
established automatically. The computer is now connected
with the FRITZ!Box.
WPS with the PIN Method
If your WLAN device supports WPS, but does not have a but-
ton to start the push method nor any possibility to enable it in
its control software, use the PIN method to establish the
WLAN connection.
You can choose between two methods:
•
the FRITZ!Box specifies the PIN
•
the WLAN device specifies the PIN.
WLANWL
AN
PowerPo
we
r
LANLA
N
DSLDS
L
InfoInfo
Push for approx.
6 seconds