FRITZ!WLAN USB Stick AC 430
20
Wireless LAN Connection Is Not Established
Remove the FRITZ!WLAN USB Stick from your computer and
then insert it again into a USB port of the computer. Install
the latest chip set drivers. See the documentation for your
mainboard to find out which drivers your computer requires.
The latest chip set drivers are available at
.
6.2
Wireless LAN Connection Is Not Established
Checking the Settings
Could not register at the wireless access point.
When the wireless LAN connection was established the wrong
wireless access station was selected, or an incorrect network
key was entered.
Make sure you selected the right wireless access point. For a
FRITZ!Box the preconfigured name of the radio network (SSID)
always begins with “FRITZ!Box”.
Make sure that you entered the correct network key. Pay spe-
cial attention to capitalization. On a FRITZ!Box the preconfig-
ured network key is found on the base of the device.
Switching On and Correctly Positioning the Wireless
Access Point
When you search for wireless networks in the vicinity of the
FRITZ!WLAN USB Stick, Windows does not find your wireless
access point.
The wireless access point is switched off or located too far
away.
Connect the wireless access point to electrical power and
switch it on.
Reduce the distance between the FRITZ!WLAN USB Stick and
the wireless access point.
Help
Cause
Help
Cause
Help
