22
Factory Settings
7
Factory Settings
The adapters from the FRITZ!Powerline Set are delivered with preset
values for the adapter name, LED control, power-saving function
(green mode) and network password settings. These four settings can
be changed as needed. There are two ways to restore the factory set-
tings later.
Restoring Factory Settings with the “Reset” Button
1.
Plug a FRITZ!Powerline adapter into an outlet.
2.
Press the “Reset” button on the adapter and hold it
down for ca. two seconds. Use a pointed object to do
this, for instance a paper clip or a mechanical pencil,
since the button is recessed in the top of the housing to
keep it from being pressed by accident.
All LEDs go out for a moment and then the adapter will re-
start. As soon as the “Power” LED stops flashing, the proce-
dure has been concluded.
Restoring Factory Settings with AVM FRITZ!Powerline
1.
Plug a FRITZ!Powerline adapter into an outlet.
2.
Use a network cable to connect the FRITZ!Powerline
adapter to a computer on which the “AVM FRITZ!Power-
line” program is installed.
3.
Start the “AVM FRITZ!Powerline” program and double-
click the icon of the FRITZ!Powerline adapter.
The “FRITZ!Powerline Device Profile” window opens.
4.
Click the “Reset” button and then “OK”.
All LEDs go out for a moment and then the adapter will re-
start. As soon as the “Power” LED stops flashing, the proce-
dure has been concluded.
FRITZ!Powerline 500E-e.fm Seite 22 Dienstag, 28. August 2012 6:41 18
