Fritz!Box 6810 LTE, Инструкция по установке и эксплуатации

Страница: 78 / 150

FRITZ!Box 6810 LTE 78
Making Telephone Calls with Convenience Functions
Accepting or Rejecting Waiting Calls on an Analog
Extension of the FRITZ!Box
When the “call waiting” function is switched on, you hear a
signal whenever you receive an external call during an active
telephone conversation. You can then accept the call within
30 seconds. If you do not accept the call, it will be rejected.
You can enable and disable the “call waiting” function in the
FRITZ!Box user interface in the menu “Telephony / Telephony
Devices”.
Accepting Waiting Calls on Other Telephones
When making calls with a cordless DECT telephone registered
on the FRITZ!Box, you can accept waiting calls using the tele-
phone menu.
Alternating Between Calls
During a telephone call you can establish a connection to a
second party. You can alternate between the two parties as
often as you like.
Accepting or Rejecting Waiting Calls on an Analog Extension
R2
Use this keypad sequence to accept a waiting
call. The first call is on hold.
If you would like to end the first call, hang up the
receiver. As soon as you have hung up your tele-
phone will ring. When you pick up the receiver,
you will be connected with the waiting call.
R1
If the first call was on hold, you can return to the
first call using this keypad sequence.
R0
With this keypad sequence you can reject a wait-
ing call.