Fritsch PULVERISETTE 1 premium Series, Руководство по эксплуатации

Страница: 9 / 58

2.2 Scope of application
The PULVERISETTE 1 premium line is a jaw crusher for pre-crushing hard
and brittle material samples from the fields of mining and metallurgy,
geology and mineralogy, the chemical, glass and ceramic industry, or
rocks and soils.
The feed size is maximum 95 mm.
The final fineness that can be achieved is between about 15 mm and 0.3
mm, depending on the setting.
The jaw crusher described here is an equipment item for applications in
industrial environments.
The device may only be used for this purpose.
2.2.1 Operating principle
The materials are crushed in a crushing chamber, created by two support
walls (11), an adjustable, fixed crushing plate (17) and a swinging, mov-
able crushing plate (21). The movable crushing jaw (12) is driven by a
flywheel. Due to its special motion sequence, the material to be crushed
is pulled into the crushing chamber and the crushed material is protected
from getting jammed. This material exits the crushing chamber through
the adjustable discharge gap and is collected in the source material con-
tainer (8).
2.3 Obligations of the operator
Before using the PULVERISETTE 1 premium line, this manual is to be care-
fully read and understood. The use of the PULVERISETTE 1 premium line
requires technical knowledge; only commercial use is permitted.
The operating personnel must be familiar with the content of the oper-
ating manual. For this reason, it is very important that these persons
actually receive the present operating manual. Ensure that the operating
manual is always near the device.
The PULVERISETTE 1 premium line may exclusively be used within the
scope of applications set down in this manual and within the framework
of guidelines put forth in this manual. In case of non-compliance or
improper use, the customer assumes full liability for the functional capa-
bility of the jaw crusher and for any damage or injury arising from failure
to fulfil this obligation.
By using the PULVERISETTE 1 premium line the customer agrees with this
and recognizes that defects, malfunctions or errors cannot be completely
excluded. To prevent risk of damage to persons or property or of other
direct or indirect damage, resulting from this or other causes, the cus-
tomer must implement sufficient and comprehensive safety measures for
working with the PULVERISETTE 1 premium line.
Safety information and use
- 9 -