manualshive.com logo in svg

Fritsch PULVERISETTE 0, Руководство по эксплуатации

Поделиться
Скачать
Fritsch PULVERISETTE 0 Скачать руководство пользователя страница 39

8 

Cleaning

DANGER!
Mains voltage!
– Before beginning with cleaning work, disconnect the

mains plug and protect the device against being unin-

tentionally switched back on!

– Do not allow any liquids to flow into the device.
– Indicate cleaning work with warning signs.
– Put safety equipment back into operation after

cleaning work.

When cleaning the entire device, adhere to the guidelines of

the Accident Prevention Regulation (BGV A3) ‐ especially

when the device has been set up in a dusty environment or

when the grinding stock processed produces dust.

8.1  Cleaning the device

The device can be wiped down with a damp cloth.

NOTICE!
Do not allow any liquids to flow into the device.

8.2  Cleaning grinding elements

Mörserschale und Mahlkugeln nach jeder Nutzung reinigen; z.B. unter

fließendem Wasser mit üblichen Reinigungsmitteln sauber bürsten.
Die Reinigung im Ultraschallbad ist zulässig.

NOTICE!
Cool grinding elements made of agate, sintered corundum

and zirconium oxide slowly and carefully.
Do not heat agate elements in a microwave under any cir-

cumstances (heating is too fast).
They must never be exposed to thermal shocks as this

could cause irreparable damage to the parts 

®

 They will

burst apart like in an explosion.

 

Cleaning

 

 

- 39 -

 

Содержание PULVERISETTE 0





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды