Fritel BBQ 3278, Инструкция по эксплуатации

Страница: 19 / 32

19
•
Leave at least 0,5 m free space around the appliance and 1 m free height in order to avoid damage caused by grease
splashes or heat and in order to work unhindered.
2. ASSEMBLY OF THE APPLIANCE
When assembling the appliance, make sure the power cord is unplugged.
a) Baking plate
For a safe use, it is very important that the plate is correctly placed on the grill holder.
•
Take the baking plate by both handles
•
Place the baking tray with the power inlet socket into the provided opening on the grill holder.
•
To remove the baking plate again, simply lift it up and pull it out of the opening.
CAUTION
: Only remove the baking plate when it has entirely cooled off or place it on a heat-resistant table mat.
TIP : The device can be used both as a table grill and as a BBQ (see point e) The support frame ).
b) The grease collecting tray
Place the grease collecting tray in the frame. The appliance may NEVER be used without grease collecting tray.
c) The power inlet socket
Plug the supplied power cord into the power inlet socket and connect the other end to the socket.
d) The hinged lid
For outdoor use or for dust free storage, the hinged lid can be used. To this end, first screw the handle onto the cover
using the supplied screws and washers (see
Fig. 1
).
Fig. 1
e) The support frame
The grill can also be used on the support frame as a bbq appliance. This must be mounted as follows:
•
Put the support frame upside down on a flat surface. The stickers
6A
and
6B
are hereby positioned at the left.
•
Insert the 2 anti-skid legs on the right side of the support frame into the provided openings and turn them until they
click into the support frame by means of the fastening pin (see
Fig. 2 ).
•
Insert the 2 legs with the pointed end on the left side of the support frame into the provided openings and turn them
until they click into the support frame by means of the fastening pin. The leg with sticker
6A must be clicked into the
opening with sticker 6A , the leg with sticker 6B into the opening with sticker 6B . (see Fig. 2 ).
CAUTION
: all legs must always be oriented with the beveled part facing outwards. The brackets are hereby directed
towards each other.
•
Insert the wheel axle through the holes of the legs with the pointed end and attach a wheel to each end (see Fig. 3 ).
•
Secure the wheel on the outside using one of the supplied clips (see Fig. 3 ).
•
Attach a cover plate to each wheel (see Fig. 3 ).
•
Put the whole frame into its correct position and push the shelf into the provided brackets on each leg (see Fig. 4 ).
•
Place the grill holder on the support frame.
•
Hook the lid under a 45° angle into the grill holder (see Fig. 5 ).
CAUTION : make sure the appliance is securely mounted on the support frame before plugging in.
TIP : The support frame can be used with the wheels facing left or right (as desired).