Frigidaire GRFC2353AD страница 25 Скачать руководство пользователя

Страница: 25 / 52

Sabbath Mode

The Sabbath Mode is a feature that

disables portions of the refrigerator

and its controls in accordance with

observance of the weekly Sabbath and

religious holidays within the Orthodox

Jewish community.
Sabbath Mode is turned ON and OFF

by simultaneously pressing and holding

both the “

FZ−

” and “

FF+

” for 10 seconds.

The display shows “Sb” while in Sabbath

mode.
In the Sabbath Mode, the High Temp

alarm is active for health reasons. For

example, if the door is left ajar the High

Temp alarm is activated. The refrigerator

will function normally once the door

is closed, without any violation of the

Sabbath/Holidays. The High Temp alarm

is permitted when cabinet temperature

is outside the safe zone for 20 minutes.

The alarm silences itself after 10 minutes

while the High Temp icon stays lit until the

Sabbath mode is exited.

For further assistance, guidelines

for proper usage and a complete

list of models with the Sabbath

feature, please visit the web at

http:\\www.star-k.org



NOTE

While in Sabbath Mode, neither the

lights, dispenser, nor the control panel

will work until Sabbath Mode is deacti-

vated.
Refrigerator stays in Sabbath Mode

after power failure recovery. It must be

deactivated with the buttons on the

control panel.



NOTE

Although you have entered the Sab-

bath Mode, the ice maker will complete

the cycle it had already initiated. The

ice cube compartment will remain cold

and new ice cubes can be made with

standard trays.

Clear Alerts

Door Open

If the freezer or refrigerator doors are

left open for five minutes or more, an

alarm sounds and the door open indicator

illuminates on the display. Close the door

or press any key on the display to silence

the alarm. The control panel will return to

normal operations after the door is closed.

High Temp Alarm

An alarm sounds in the event of a high

temperature condition. The control panel

displays HI on whichever compartment

the alarm is detected in and the

alarm sounds every 10 seconds until

acknowledged. Touch any key or open a

door to silence the alarm.

Power Outage

In the event of a power outage, a tone

sounds and the power outage alert

illuminates once power has been restored.

Press any key on the control panel to

silence the alarm.

Flapper (Dispenser Models Only)

If the flapper (or ice chute door) is held

open by a jammed ice cube when “Cube”

or “Crush” is selected, an alarm sounds

and the current selection blinks on the

dispenser control. The alarm resets when

the ice cube is removed.

CONTROLS AND SETTINGS



NOTE

Food placed within 1 in. in front of air

ports may cause food to freeze.

External Water Dispenser Control Display

Содержание GRFC2353AD





















































Результаты поиска

Содержание GRFC2353AD

Отзывы:

Похожие инструкции для GRFC2353AD

Бренды по названию

Популярные бренды

Frigidaire GRFC2353AD, Инструкция по использованию и уходу

Результаты поиска

Содержание GRFC2353AD

Отзывы:

Похожие инструкции для GRFC2353AD

Бренды по названию

Популярные бренды