Frigidaire GRFC2353AD страница 16 Скачать руководство пользователя

Страница: 16 / 52

CAUTION

Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.



NOTE

All set screws should be tightened so the screw is below the surface of the handle.

The handles should be drawn tight to freezer and refrigerator doors with no gaps.

Opening the opposite door while tightening the Allen screw makes installation easier.
The door handle may loosen over time or if it was installed improperly. If this hap-

pens, tighten the set screws on the handles.

Door Handle Mounting

Instructions

1. Remove handles from carton

and any other protective

packaging.

2. Position refrigerator handle end

caps over upper and lower pre-

installed shoulder bolts (A) that

are fastened into door, ensuring

the holes for the set screws are

facing towards the opposite door.

3. While holding handle firmly

against door, fasten upper and

lower Allen set screws (B) with

supplied Allen wrench.

4. Repeat steps 2 and 3 to install

opposite handle. Ensure the

holes for the set screws are

facing towards the opposite

door.

5. Position freezer handle end caps

over left and right pre-installed

shoulder bolts (A) that are

fastened to the door, ensuring

the holes for the set screws are

facing down.

6. While holding handle firmly

against door, loosely tighten

right Allen set screw (B) with

supplied Allen wrench until

there is no gap between handle

and door.

7. Still holding the handle firmly to

the door, firmly tighten left Allen

set screw (B) with supplied Allen

wrench.

8. Return to the right Allen set

screw (B) and firmly tighten

with supplied Allen wrench.

Mounting Refrigerator Handles



NOTE

When tightening the Allen set screws, it

is important that force be applied to the

longer arm of the Allen wrench supplied in

the handle packaging.

DOOR HANDLE INSTALLATION

Mounting Freezer Handle

Содержание GRFC2353AD





















































Результаты поиска

Содержание GRFC2353AD

Отзывы:

Похожие инструкции для GRFC2353AD

Бренды по названию

Популярные бренды

Frigidaire GRFC2353AD, Инструкция по использованию и уходу

Результаты поиска

Содержание GRFC2353AD

Отзывы:

Похожие инструкции для GRFC2353AD

Бренды по названию

Популярные бренды