Frigidaire FWF 81663W, Руководство пользователя, Страница: 26 / 32

WARNING!
Refer to Safety chapters.
Introduction
The appliance does not start or it stops
during operation.
First try to find a solution to the problem
(refer to the table). If the problem persists,
contact the Authorised Service Centre.
With some problems, the acoustic
signals operate and the display shows
an alarm code:
•
- The appliance does not fill with
water properly. Start the appliance again
by pressing
button. After 10 seconds
the door will be unlocked.
• - The appliance does not drain the
water.
• - The appliance door is open or not
closed correctly. Please check the door!
If the appliance is overloaded,
remove some items from the drum
and/or keep pressed the door and
push the
button at the same
time until the indicator stops
flashing (see the picture below).
• - The mains supply is unstable.
Wait until the mains supply is stable.
• - No communication between
electronic elements of the appliance.
Switch off and switch on again. The
programme was not finished properly or
the appliance stopped too early. If the
alarm code appears again, contact the
Authorised Service Centre.
WARNING!
Deactivate the appliance before you
do the checks.
Possible failures
PROBLEM POSSIBLE SOLUTION
The programme does not
start.
• Make sure that the mains plug is connected to the mains
socket.
• Make sure that the appliance door is closed.
• Make sure that there is not a damaged fuse in the fuse box.
• Make sure that the Start/Pause has been pressed.
• If the delay start is set, cancel the setting or wait for the end
of countdown.
• Deactivate the Child Lock function if it is on.
26
TROUBLESHOOTING