background image

13

Automatic Ice and Water Dispenser

EXTREME

To freeze food at a faster rate to preserve freshness, push the Touch Pad        for 3-5 seconds to

FREEZE

activate this feature. A green light will appear above the Touch Pad. Push the Touch Pad        again
for 3-5 seconds to deactivate.

EXTRA

To increase ice production for special occasions, such as parties, push the Touch Pad       for

ICE

3-5 seconds to activate this feature. A green light will appear above the Touch Pad. Push the
Touch Pad       again for 3-5 seconds to deactivate.

CUBE

Press the CUBE Touch Pad       to get cubed ice. A green light will appear above the Touch Pad.
Press glass against ICE dispensing paddle       as far up as possible to catch all ice.

CRUSH

Press the CRUSH Touch Pad        to get crushed ice. A green light will appear above the Touch Pad.
Press glass against ICE dispensing paddle       as far up as possible to catch all ice.

LIGHT

Press the LIGHT Touch Pad        to turn on dispenser light. Press      again to turn the light off.
The light also turns on automatically when ice and/or water is dispensed. Replace light bulb with
an appliance bulb of the same wattage.

FILTER

The FILTER STATUS indicator light above the Touch Pad       will light up each time the dispenser

STATUS

is used. The following filter light indications are:

Green

The filter is still operating within its specified life cycle.

Amber

The filter has reached approximately 80% of its useful life. This is the recommended time
to purchase a replacement filter.

Red

The filter is 100% used up. Change the filter as soon as possible.

After the filter cartridge has been changed, press and hold the FILTER RESET Touch Pad       for
10-15 seconds.

   NOTE

: The Green, Red and Amber lights will flash when reset is completed.

LOCK

The Ice & Water Dispenser can be 

locked out

 to prevent unwanted use.

To Lock Out

Press the LOCK Touch Pad        for 3-5 seconds. A 

Red 

light will appear above

the Touch Pad.

To Unlock

Press the LOCK Touch Pad        for 3-5 seconds until the 

Red 

light above the

Touch Pad goes out.

WATER

To operate the water dispenser,

 press a glass against the WATER dispensing paddle       . To

stop dispensing water, pull the glass away from the dispensing paddle       . Dispensed water is not
cold. For colder water, add crushed ice or cubes before dispensing water. A drip tray located at
the base of the dispenser catches small spills and allows them to evaporate. This drip tray is
removable and dishwasher safe. 

Do not pour water and excess ice in this area

 because there

is no drain.

2

AUTOMATIC ICE & WATER DISPENSER OPERATING INSTRUCTIONS

Features may vary according to model.

1

2

3

4

5

6

7

8

9

2

3

8

8

5

6

5

4

6

7

7

1

1

9

9

Содержание FSC23F7TDW1



























Отзывы: