07
Installation
Choosing the location
In order to ensure that heat dissipates rapidly and
that the refrigerator operates efficiently, with low
energy consumption, we recommend leaving the
following minimum distances between the
refrigerator and the walls and ceiling:
Top: 30cm
Sides: 20cm
Door side: 30cm
Back: 10cm
Check to be sure that there is enough space in front
of the refrigerator to open the door (160°).
Install the refrigerator in a well-ventilated area,
away from direct sunlight and from heat sources,
such as ovens and burners, from inflammable
materials, and from areas where water is frequently
used, such as sinks.
Do not install the refrigerator outdoors.
30cm
(top
)
10cm
(back
)
20cm
(side)
30cm
(door side)
16
Outside
Clean the outside of the refrigerator with a damp
cloth dipped in warm water and mild soap.
Once every 6 months, clean the back of the
refrigerator with a vacuum cleaner or a duster. The
dust that accumulates there interferes with proper
functioning of the condenser, and therefore of the
refrigerator, leading to higher energy consumption.
Disconnect the refrigerator before cleaning and do
not touch the condenser or the compressor, as they
may be hot.
The drainage tray should be cleaned at least once a
year.
Water will enter the refrigerator if the drainpipe
becomes blocked; if this happens, disassemble the
light protector and wash out the drain pipe.
Door Seals
The rubber door seals should be carefully cleaned
with a damp cloth. Rinse and dry them carefully to
avoid damage.
Substituting the Light
Before changing the light, first unplug the
refrigerator, otherwise you may receive an electric
shock or be injured.
1.
Remove the screws using a Phillips screwdriver.
2.
Remove the lamp cover by gently turning it
downwards.
3.
Unscrew the lamp.
4.
Place a new 10 W refrigerator bulb of the same
type and size.
5.
Replace light cover and screws.
