9
DOOR REMOVAL
Getting through narrow spaces
If refrigerator will not fit through an
entrance area, doors can be removed.
Check first by measuring the entrance.
To prepare for removing the doors:
1. Make sure the electrical power cord
is unplugged from the wall outlet.
2. Remove any food from the door
shelves and close the doors.
To remove the refrigerator doors:
1. Open doors to 90°.
2. Trace lightly around the door’s top
hinges with a pencil. This makes
reinstallation easier.
3. Disconnect electrical harness
running from door to hinge cover.
4. Remove three 8 mm bolts from both
top hinges. Lift doors up off lower
hinges and carefully set aside..
CAUTION
Be sure doors are set aside in a secure
position where they cannot fall and
cause personal injury, or damage to the
doors or handles.
Lower Hinge Removal
Once both doors are in place, ensure they
are aligned with each other and level (See
replace the top hinge cover.
5. To gain access to lower hinge, drawer
will need to be extended. Unscrew the
3 lower hinge screws and slide the
hinge inward.
6. To reinstall doors, reverse procedure.
