Frigidaire FRFC2323AS страница 43 Скачать руководство пользователя

Страница: 43 / 50

TROUBLESHOOTING

Concern Potential Cause

Common Solution

Automatic Ice Maker

Ice maker is

not making

any ice.

• Ice maker is turned off.

• Refrigerator is not

connected to water line

or water valve is not

open.

• The water supply line is

kinked.

• The water filter is not

seated properly.

• The water filter may be

clogged with foreign

material.

• Turn on ice maker. For the

refrigerator ice maker, press and

hold the Ice Maker On-Off button

on your display. For the freezer ice

maker, turn the ice maker on by

pressing the toggle switch on the

(-) side.

• Connect the unit to the household

water supply and ensure the water

valve is open.

• Ensure that the supply line does

not kink when the refrigerator is

pushed into place against the wall.

• Remove and re-install the water

filter. Be sure to seat it fully into the

locked position.

• If water dispenses slowly or not at

all, or if the filter is six months old

or older, it should be replaced.

1-800-265-8352

(Canada)

Frigidaire.ca

1-800-374-4432 (United States)

Frigidaire.com

Let us help you troubleshoot your concern! This section will help you with common

issues. If you need us, visit our website, chat with an agent, or call us. We may be able

to help you avoid a service visit. If you do need service, we can get that started for you!

Содержание FRFC2323AS



















































Результаты поиска

Содержание FRFC2323AS

Отзывы:

Похожие инструкции для FRFC2323AS

Бренды по названию

Популярные бренды

Frigidaire FRFC2323AS, Инструкция по использованию и уходу

Результаты поиска

Содержание FRFC2323AS

Отзывы:

Похожие инструкции для FRFC2323AS

Бренды по названию

Популярные бренды