14
Allowing Cooling Time Before Use
To ensure safe food storage, allow your refrigerator to operate with the doors closed for at least
8 to 12 hours before placing food inside. During this cooling period, you do not need to adjust
the controls, which are preset at the factory.
Setting Cooling Temperatures
(Single Digit Display - Features may vary.)
Temperature Adjustment
To adjust the temperature to a higher or lower setting, press the Up (
∧
) or Down (
∨
) button
closest to the display. The first time you press the button, the display shows current setting you
entered. Each press of the button after that changes the setting by one.
CONTROLS
Your refrigerator comes with a state-of-the-art electronic digital control system. The system’s
control panel is located at the top of the refrigerator compartment.
The 2 digital displays on the left half of the control panel indicate the current settings of your
freezer and refrigerator compartments. Should you desire to see what the current accurate
temperature is, place a separate thermometer inside the freezer or refrigerator compartment in
the desired location.
NOTE
When changing control settings, wait 24 hours for the temperature to stabilize before making
additional changes.
Temperature Adjustment
If refrigerator compartment is too warm Adjust refrigerator control one degree colder by
pressing up (
∧
) button.
If refrigerator compartment is too cold Adjust refrigerator control one degree warmer by
pressing the down (
∨
) button.
If Freezer compartment is too warm
Adjust Freezer control one degree colder by
pressing up (
∧
) button.
If Freezer compartment is too cold
Adjust Freezer control one degree warmer by
pressing the down (
∨
) button.
