Started
WITH YOUR
FRIGIDAIRE 20 CU FT REFRIGERATOR
GETTING
Set your refrigerator temperature
It’s easy! When first turning your appliance on, adjust to
Recommended
. To ensure safe food storage, allow the appliance to
operate with the door closed for at least 8 hours before loading it
with food.
If necessary, we recommend you adjust the temperature
gradually, in small increments, allowing the temperature to stabilize.
YOU’RE IN CONTROL
1. For warmer temperatures, adjust the setting to
Cold
. For colder
temperatures, adjust the setting to
Coldest
.
2. The control can be left at the factory preset
(
Recommended
) or adjusted as desired.
3. If the temperature inside the cabinet increases, the red
High Temp*
light
will illuminate and the alarm will sound.
4. The
Chill Boost*
mode quickly drives the appliance to a colder
temperature and stays active for up to 24 hours before automatically
deactivating or being manually exited.
5. Pressing the
Temp*
button will allow you to scroll through the five
temperature settings from
Cold
(top) to
Coldest
(bottom), and then loop
back to
Cold
.
2
1
3
4
5
*Refer to your Use & Care Guide for detailed information.
BEFORE YOU START
Set up your refrigerator
Prior to using the refrigerator, make sure it is located on a floor that is level and
strong enough to support it fully loaded. Check out
INSTALLATION
in your Use &
Care Guide to see how to set the anti-tip bracket.
Before operating for the first time
Clean the inside of your appliance before using it. See the
CARE AND CLEANING
section in your Use & Care Guide.
A19273401 (2002)
