Frigidaire Affinity 6000 Series, Руководство по обслуживанию, Страница: 45 / 74

Section 4 Component Teardown
4-3
Loading Door Breakdown (continued)
3. With inner liner removed, the door hinge lifts out.
(See Figure 4-5)
4. With the inner liner removed, the inner glass lifts off.
5. The frame holding the outer lens to the outer liner is
held in place by three tabs. Release the tabs and
the frame will lift off. (See Figure 4-6)
6. With the frame removed, the inner lens will lift off.
Top Panel Removal
1. Disconnect the washer from the electrical supply.
2. Extract the (2) screws from the rear of the top, slide
the top back and lift it off. (See Figure 4-7)
Figure 4-5.
Figure 4-8.
Figure 4-6.
Figure 4-9.
Figure 4-7.
Light Switch Removal
1. Disconnect the washer from electrical supply,
remove the top panel and open the loading door.
2. Disconnect the two wires from the light switch.
(See Figure 4-8)
3. Squeeze the tabs on the sides of the switch and
push the switch out the front of the washer.
(See Figure 4-9)
Outer
Lens Tab
Screws
Disconnect
From Switch
Light Switch