Frigidaire A13110307 страница 18 Скачать руководство пользователя

Страница: 18 / 32

To Connect the Water Supply Line To the

Ice Maker Inlet Valve

1. Disconnect the refrigerator from the

electrical power source.

2. Place the end of water supply line

into a sink or bucket. Turn ON the

water supply and flush the supply

line until the water is clear. Turn OFF

the water supply at the shutoff valve.

3. Remove the plastic cap from the wa-

ter valve inlet and discard the cap.

4. If you use copper tubing

, slide brass

compression nut, and then the fer-

rule (sleeve) onto the water supply

line. Push the water supply line into

the water valve inlet as far as it will

go (

" / 6.4 mm). Slide the ferrule

(sleeve) into valve inlet and finger

tighten the compression nut onto

the valve. Tighten another

turn

with a wrench; DO NOT overtighten.

See below.

If you use braided flexible stain-

less steel tubing

, the nut is already

assembled on the tubing. Slide the

nut onto the valve inlet and finger

tighten the nut onto valve. Tighten

another

turn with a wrench; DO

NOT overtighten. See below.

5. With the steel clamp and screw,

secure the water supply line (copper

tubing only) to the rear panel of

refrigerator as shown.

6. Coil the excess water supply line

(copper tubing only), about 2

turns, behind the refrigerator as

shown and arrange the coils so they

do not vibrate or wear against any

other surface.

7. To turn the ice maker on, press the

ice maker’s On/Off power switch so

the LED is illuminated.

Plastic Water

Tubing to Ice

Maker Fill Tube

Brass

Compression

Nut

Ferrule

Sleeve

Copper

Line

Water

Valve

Bracket

Water

Valve Inlet

Water

Valve

Copper water line

from household water supply

Clamp

(Include enough tubing in loop to allow

moving refrigerator out for cleaning.)

Units with copper tubing

service

mode

8. Turn ON the water supply at the

shutoff valve and tighten any con-

nections that leak.

9. Reconnect the refrigerator to the

electrical power source.

Brass

Compression

Nut

Water Line

Water Valve

Bracket

Valve Inlet

Water Valve

6 ft minimum (1.8 m)

braided flexible stainless steel

water line from household water supply

Plastic Water

Tubing to Ice

Maker Fill Tube

(Include enough tubing in to allow

moving refrigerator out for cleaning.)

Units with braided flexible

stainless steel tubing

WATER SUPPLY CONNECTION

Содержание A13110307

































Результаты поиска

Содержание A13110307

Отзывы:

Похожие инструкции для A13110307

Бренды по названию

Популярные бренды

Frigidaire A13110307, Инструкция по использованию и уходу

Результаты поиска

Содержание A13110307

Отзывы:

Похожие инструкции для A13110307

Бренды по названию

Популярные бренды