6
Preparing and
Loading Dishes
Dish Preparation
Scrape away large pieces of food, bones, pits,
toothpicks, etc. The continuous filtered wash
system will remove remaining food particles.
Burned-on foods should be loosened before
loading. Empty liquids from glasses and cups.
Foods such as mustard, mayonnaise, vinegar,
lemon juice and tomato based products may
cause discoloration of stainless steel and
plastics if allowed to sit for a long period of
time. Unless the dishwasher is to be operated
at once, it is best to rinse off these food soils.
•
Load racks so that large items do not
prevent the detergent dispenser from
opening.
•
Check manufacturer’s recommendations
before washing items in question.
•
If the dishwasher drains into a food
disposer,
be sure disposer is completely
empty before starting dishwasher.
Heat Dry Option
HEAT DRY ON option provides faster drying
since the heating element is on during the
drying portion of cycle.
HEAT DRY OFF option saves electricity since
the heating element is off during the drying
portion of cycle. To speed drying process,
open the door slightly after the cycle is
complete. Some water droplets may remain on
door and tub and in areas where dishes touch
silverware basket and rack.
With either option, you may see water vapor
coming from vent during the washing and/or
drying portion of cycle. On some models, the
vent is closed during washing to hold moisture
and sound inside and then opens for drying.
The drying option may be changed at any time
during the cycle and affects only the drying
period.
Status Indicator Lights
(available select models)
When DELAY START option is selected, the
Delay Start light will glow as timer counts
down to begin cycle.
The HEATING DELAY light means the cycle is
being extended to heat water to proper
temperature in the main wash or final rinse,
based on options selected.
CLEAN light comes on when a cycle is
complete. To turn it off, turn dial slightly until
light goes off.
Operating
Instructions
(continued)
