5
Select POTS & PANS and
desired OPTIONS. HI-TEMP
WASH and SANITIZE will
automatically be provided.
2 washes
5 rinses
104
For pots, pans, casseroles
and dinnerware with
dried-on or baked-on soils.
Cycle Chart
Time*
(minutes)
Washes/
Rinses
Water
(approx.)
To Select Cycle
Cycle
Pots & Pans
Select NORMAL WASH
and desired OPTIONS.
2 washes
3 rinses
89
For regularly soiled dishes
and silverware.
Normal Wash
Select UPPER RACK
and desired OPTIONS.
1 wash
2 rinses
65
For lightly soiled or pre-rinsed
dishes and silverware when
you do not have a full load.
Upper Rack
Select RINSE ONLY.
DO NOT USE detergent.
2 rinses
18
For rinsing dishes that will
be washed later.
Rinse Only
*
Includes dry time.
Operating Instructions
(continued)
gal.
imp. gal.
liters
8.5
7.1
32.2
gal.
imp. gal.
liters
6.1
5.1
23.1
gal.
imp. gal.
liters
3.7
3.1
14.0
gal.
imp. gal.
liters
2.4
2.0
9.1
Options Selections
Sanitize Option
To sanitize your dishes and glassware, select the
SANITIZE option. When selected, the light above
the pad will come on and remain on until end of
cycle. The water temperature in the final rinse will
be raised to 155°F (68°C) and will maintain that
temperature for 9 minutes. This option is available
in POTS & PANS and NORMAL cycles. Only
these sanitization cycles have been designed to
meet NSF requirements.
The cycle time will be extended until the proper
water temperature is reached.
Washing action will
continue during the water heating delay. For best
results, the incoming water temperature should be
at least 120°F (49°C).
The sanitize criteria may not be satisfied if there is
an interruption of the cycle, power failure or if the
incoming water temperature is below 120°F
(49°C).
To turn off the SANITIZE option, press the pad a
second time. The light above the pad will turn off.
Hi-Temp Wash
When HI-TEMP WASH option is selected, the
dishwasher heats water in the main wash to
approximately 140°F (60°C).
This increase in water temperature helps
dishwasher detergent remove food grease
and soil from dishes more effectively and aids
in drying. HI-TEMP WASH option can be used
with all cycles except UPPER RACK and
RINSE ONLY. HI-TEMP WASH is automati-
cally provided when POTS & PANS cycle is
selected.
When HI-TEMP WASH option is selected, the
light above the pad will come on and remain
on until end of cycle. To turn off the HI-TEMP
WASH option, press the pad a second time.
The light above the pad will turn off.
