PULSE915-LRW_User_Manual
Page
8
/
23
1
Introduction
This document describes the technical parameters and key functions which are connected
with customers’ applications, and it can help customers quickly understand the data format,
wiring definitions, as well as other related information of PULSE915-LRW. Associated with
configuration user manual, customers can use the terminal to any pulse emitting device
(water, gas, electricity, etc.) easily.
2
Product Concept
2.1
General Description
PULSE915-LRW is an external pulse acquisition and wireless data transmission terminal. It
is mainly used for data acquisition of single-pulse or double pulse of equipment, and based
on LoRaWAN technology to implement active data reporting.
PULSE915-LRW supports two kinds of pulse signal output sensors of Hall and reed switch.
That enables it to operate with any pulse emitting device (water, gas, electricity, etc.).
With pre-installed long-life battery and built-in antenna, the wireless pulse acquisition
terminal PULSE915-LRW has the characteristics of simple deployment, high reliability, low
power consumption and long transmission distance.
2.2
Key Features
The following shows the key features of wireless pulse acquisition terminal PULSE915.
Long range wireless data transmission.
Support active sensor (Hall) and passive sensor (reed switch).
Configurable reporting interval.
Pre-installed long-life battery and built-in antenna.
UART serial port or air wireless configuration.
UART firmware upgrade or FOTA.
Battery power detection and optional automatic power reporting.
Average life 10 years*.
IP67 waterproof rating.
