PULSE915-LRW_User_Manual
Page
20
/
23
9s-15s
Reset
Typically 12s
>15s
No response
Close magnet detecting function 60s
When the product exits the configuration mode, basing on whether the user has sent a
network access command (AT + JOIN) and whether the current mode is OTAA, it will
automatically join the network if both are satisfied. The network access result can be verified
by triggering whether the data report is successful.
The parameters can be set through AT command, for detailed command information, please
refer to section 4.2.
6
Dimensions and Installation Instructions
6.1
Dimensions
The dimensions of PULSE915-LRW is show blew (not contains the cable, unit mm).
