Shenzhen Friendcom Technology Development Co., Ltd.
13
within 120 seconds after last operation, user should restart the radio for setting.
2. The BUSY signal, SWITCH and CTCSS/DCS will only be available after 2 minutes when user
finish programming setting
4.2.2 Input Channel Data
In this option part, user can input channel selection from 1 to 16, Rx,Tx frequency, Rx,Tx tone option such as
CTCSS, DCS, power, switch and make SCAN list, and choose bandwidth, Narrow or Wide according to each
channel.
Fig. 4 Feature Column
Double-click on the any window inside red-rectangle area to set Rx,Tx frequency, Rx, Tx option for each
channel.
4.2.2.1 Power
1-5 output power can be programmable for each channel.
4.2.2.2 Bandwidth
