En
gl
is
h
CARE AND MAINTENANCE
■
Fingerprints or dirt on the door camera lens can
cause a dull or blurred picture. Occasionally use a
soft, damp cloth to wipe the surface. Do not use
cleaning products. Over-zealous or too frequent
cleaning will scratch the surface and blur the
picture.
■
Keep the receiver and charger base away from rain,
liquids or risk of liquid spillage.
■
Do not place rings or other metal objects over the
peg in the charging unit – they will become hot to
the touch!
■
Do not allow any rain or damp to become trapped
inside the door camera, as it may damage the
internal parts.
■
Avoid replacing door camera batteries during wet
weather.
■
Do not take the products apart; there are precision
components inside which are easily damaged
■
Avoid dropping or strong shocks to either unit.
■
Only use the included or recommended power
supply.
■
Do not use or store either unit in dusty, dirty areas.
REPLACING THE RECEIVER BATTERIES
Constant use will eventually reduce the capacity of the
rechargeable batteries, and reduce the receiver life off
the charger base. Replace the batteries by unscrewing
the single battery cover screw at the bottom rear of
the receiver. Remove the old batteries and replace with
three NiMh type AA batteries with a minimum capacity
of 1200mAH. Follow the battery orientation symbols in
the battery compartment. Replace the battery cover and
cover screw.
2
1
M
ai
nt
en
an
ce
a
nd
u
se
G-10
