Page 2
Instruction
Step
5.
Loosen 4 screws (4) holding prism plate clamp.
Two screws on left side, two screws on right side.
Using
Hex
key
M4
Step
6.
Take out the “old” prism protection plate (5)
Step
7.
Put in the “new” prism protection plate
Step
9.
Reverse the procedure to install.
Necessary tool:
Hex key M4 (Inbus M4)
Supplied with
replacement prism plate
Step
4.
Remove the 3 plates (3)
by sliding them
downwards.
