WATER DRAINAGE
USE OF WATER TANK
1. The water full indicator will illuminate when the tank is full (compressor and fan
will stop at this time) and a buzzer will buzz for some time.
2. Remove the water tank and empty it immediately.
3. Insert the water tank into the unit gently until it reaches to its position.
HOW TO EMPTY THE WATER TANK
1.
Pull out the water tank from water tank's concave trough.
2.
Move the water tank and pull it out from the front.
USE OF CONTINUOUS WATER DRAIN
1.
Take out the water plug from the drainage hole on the back panel.
2.
Insert a PVC Water drainage pipe of 10mm I.D. in the drainage hole and
connect it to a container (such as a bucket) or to an outlet in the floor.
3.
Keep the water plug, don’t lose it.
Note:
•
Don’t block the drainage hole or pipe. But in case the drainage hole or pipe
is blocked, the water which is accumulated to certain quantity will flow into
the water tank from the water overflow hole.
•
Water pipe does not fold or higher than the mouth of exhaust water.
20