background image

Direct exposure to UV light is harmful to bare skin 

and eyes 

This unit is equipped with a UV light disinfection system

To prevent exposure to UV light, disconnect power before servicing 

Indirect exposure (blue glow) is not harmful

Caution 

UV Light

Germicidal UV Light Installation Instructions

Cutaway view of typical Mini UV® installation in mini split

Fresh-Aire Mini UV improves indoor air quality and 

fights biological contamination inside the air handling 

system. It extends the life of the air system and reduces 

maintenance costs.

Installation Notes

Mini UV is typically used for mini split systems and other limited space applications. 

Because space is tight the best place for mounting the UV lights is usually inside 

the supply vent with the light shining onto the blower wheel (which is prone to the 

worst mold growth). 

3. 

Drill holes to pass lamp 

cables through to back 

of unit as needed.

1. 

Determine the best location for the UV lamp clips 

and clean that area with the alcohol wipe.  Slide the 

mounting brackets onto the ends of the UV lamps.

1. 

Remove cover.

2. 

Detach drain pan to 

access the area behind it.

Parts Included

A

 UV Lamps

B

 Lamp Clips

C

 Power Supply

C

 Self-tapping Screws

D

 Power Harness

E

 Zip Ties

F

 Zip Tie Base

G

 Ring Connectors

H

 

Alcohol Wipe

I

 Adhesive Tape

J

 UV Warning Sticker

IMPORTANT!

• 

Only qualified technicians should install this product

• 

Install in accordance with relevant building codes

• 

Read instructions carefully including safety warnings

IMPORTANT!

Rotate the lamp so the warning sticker is visible and the UV light 

shines on blower wheel and mold prone areas, 

NOT INTO THE ROOM

IMPORTANT!

Orient the UV lamps so that the light shines into the air system, not into the room

A

B

C

C

D

E

G

H

F

I

J

WARNING

PROTECT EYES FROM UV LIGHT

TURN OFF UNIT OR DISCONNECT

BEFORE SERVICING

Air System Preparation

UV Lamp Mounting

2. 

Peel off paper from the adhesive 

backing on the mounting brackets.  

Press the lamp with lamp clips firmly in 

place about 2” from blower wheel. 

3. 

Pass the UV lamp cables 

through to the back of 

the AC system.

TUV-MINI-MAN 04.30.12

© 2012 Fresh-Aire UV

Отзывы: