Fresenius Medical Care 460018 Скачать руководство пользователя страница 8

Страница: 8 / 75

P/N 460018 Rev. D

ECTION

VERVIEW

This product is manufactured by:

Fresenius USA, Inc.

4040 Nelson Avenue.

Concord, CA. 94520.

Fresenius USA, Inc. is a wholly owned subsidiary of Fresenius Medical Care Holdings, Inc.

The Fresenius Medical Care Dry Acid Dissolution Unit is semi-automated electro-mechanical design, which is

designed to mix a 132 gallon (500 liters) batch of acid concentrate with a minimum of operator supervision,

and is to be only used for the mixing of Fresenius Medical Care Dry Acid Products.

There are two (2) pre-programmed cycles built into the Fresenius Medical Care Dry Acid Dissolution Unit; the

RINSE CYCLE

and the

DISSOLUTION CYCLE

. The RINSE CYCLE has four operations- FILL, RECIRCULATE, DRAIN,

and CYCLE COMPLETE. The first three: FILL, RECIRCULATE, and DRAIN are done twice before it reaches CYCLE

COMPLETE Operation. The DISSOLUTION CYCLE has eight operations-FILL, ADD GRANUALES, MIX,

DEAREATION, FINAL FILL, HOMOGENIZE, TRANSFER, and CYCLE COMPLETE

The control panel will display the Dry Acid Dissolution Unit status at any given time, making it easy for the

operator to follow the progress of the operations in each cycle. The right side of the panel displays the RINSE

CYCLE, and the left side of the panel displays the DISSOLUTION CYCLE.

In addition, a manual override has been incorporated into the unit (See Section 9, page 27).

The following components are typical equipment for use with this device. Note: A hydrometer listed below

may be supplied with the machine but its use is not mandatory. Use of any hydrometer that is calibrated at

60°F following ASTM Standard E126 is permitted.

For other Original Equipment Parts see Spare Part Manual, PN450363, on www.fmcna.com.

Description

Part Number

1. Hydrometer, Range 1.000 – 1.220

G84-001-60

2. Hydrometer, Range 1.180 – 1.210

390591

3. 500ml Hydrometer Cylinder

G79-000-26

4. 1 Micron Filter Cartridge

G84-202-12

5. Filter Housing Wrench

G84-001-43

6. Tank Nozzle Assembly

G97-283-08

7. ¾” Dust CAP

332107-10-01

8. ¾” Hose Shank Coupler

G84-001-57

9. ¾” Male Adapter

332107-10

Содержание 460018












































































Результаты поиска

Содержание 460018

Отзывы:

Бренды по названию

Популярные бренды

Fresenius Medical Care 460018, Руководство оператора

Результаты поиска

Содержание 460018

Отзывы:

Бренды по названию

Популярные бренды