Fresenius Kabi Agilia SP Скачать руководство пользователя страница 51

Страница: 51 / 306

6.2.10

Test 9: Indication

6.2.11

Test 10: Keypad

Test Description

Run this test to check the correct functioning of display, battery charge status indicator, power

supply indicator, infusion indicator lights, microphone and buzzer.

The pump screen, indicators, microphone and buzzer work properly.

If this test fails, replace the display board and LCD display. See section 8.3, page 83.

Required Tools and Equipment



No specific tools or equipment are required

Access the

Tests

menu. See section 6.2.1, page 40.

Press the arrow keys to select

Test 9: Indication

Press

enter

Check that:



A white screen is displayed.



The battery charge status indicator, power supply indicator, infusion
indicator lights are lit.



is blinking in the bottom-right corner of the screen.

Press

Check that:



A blue Indication screen is displayed.



The battery charge status indicator, power supply indicator, infusion
indicator lights are flashing.



Exit

is displayed in the bottom-right corner.



The microphone and buzzer sound.

Press

exit

to return to the

Tests

menu.

If you do not press exit in the next 10 seconds, the pump returns automatically to

Tests

menu.

Test Description

Run this test to check the correct functioning of all pump keys.

The keypad works properly.

If this test fails, replace the upper case that supports the keypad.

See section 8.2, page 81.

Required Tools and Equipment



No specific tools or equipment are required

Access the

Tests

menu. See section 6.2.1, page 40.

Press the arrow keys to select

Test 10: Keypad

Press

enter

Press all keys one by one, and check that the corresponding circle on the

screen is highlighted.

Press

for at least 5 seconds to exit and return to the

Tests

menu.

Содержание Agilia SP



















































































































































































































































































































Результаты поиска

Содержание Agilia SP

Отзывы:

Бренды по названию

Популярные бренды

Fresenius Kabi Agilia SP, Техническое руководство

Результаты поиска

Содержание Agilia SP

Отзывы:

Бренды по названию

Популярные бренды