Fresenius Kabi Agilia SP, Техническое руководство

Страница: 271 / 306

123
17.3
Battery Operating Mode
Information

Do not replace with a battery other than the one provided by
Fresenius Kabi .

Do not use the pump without the battery connected.

Do not disconnect the battery when the device is operating on AC
or battery power. Disconnect the power cord and power off the
device before disconnecting the battery.

Do not incinerate or place near a flame.

Do not drop, crush, puncture, modify or disassemble the battery.

Do not use a battery that is severely scratched or damaged.

Do not short the terminals.

Do not expose to high temperatures or very low temperatures:
refer to the operating conditions for use, and the storage
instructions.

Do not try to charge or discharge the battery outside of the device.

For more information on replacing the battery, refer to the
technical manual.
The device is provided with an internal battery that automatically
provides power to the device in case of power failure or disconnection
from the AC power supply. The battery charges when the pump is
connected to AC power supply.
Before starting for the first time, charge the battery for approximately
6 hours by plugging in the power supply cord with the pump powered off.
Information
During operation, leave the device connected to the power supply in
order to maintain the battery's charge and maximum capacity, and to
maximize battery lifetime and performance.