Fresenius Kabi Agilia SP Скачать руководство пользователя страница 256

Страница: 256 / 306

108

Device Storage

14.1

Precautions for Storage

14.2

Storage and Transport Conditions



Handle the device with care during storage.



Store the device in a cool, dry place. The storage area must be
clean and organized.



Clean and disinfect the device prior to storage.

Warning

If the device is not used for an extended period (longer than 2 months),

it is recommended that the battery be removed from the device and put

in storage by authorized personnel. If the battery cannot be removed, or

the device will be used in less than 2 months, charge the battery at least

once a month by connecting the device to the AC power supply for at

least 6 hours.

Observe the following conditions for storage and transport:



Temperature:
-10 °C to +60 °C



Pressure:
500 hPa (375 mmHg / 7.25 PSI) to 1060 hPa (795 mmHg /

15.37 PSI)



Relative humidity:
10 % to 90 % without condensation



Altitude:
Up to 3000 m

Содержание Agilia SP



















































































































































































































































































































Результаты поиска

Содержание Agilia SP

Отзывы:

Бренды по названию

Популярные бренды

Fresenius Kabi Agilia SP, Техническое руководство

Результаты поиска

Содержание Agilia SP

Отзывы:

Бренды по названию

Популярные бренды