Frequency central
Build documentation for:
MU Wave Runner LFO
Powered by Electric Druid code exclusive to Frequency Central
Wave Runner is a multi-waveform sync-able LFO based on the Electric
Druid TAPLFO2D family of code, but with some significant additions and
improvements. The TAPLFO2D-FC PIC is not compatible with similar
modules, and was developed specifically for the Wave Runner.
Main PCB Assembly
1.
Place and solder all resistors and diodes
2.
Place and solder 20MHz crystal
3.
Place and solder both IC sockets
4.
Place and solder both 22pF capacitors
5.
Place and solder all non electrolytic capacitors
6.
Place and solder BC547, 78L05 and 79L05
7.
Place and solder power header
8.
Place and solder 10K trimmer
9.
Place and solder all electrolytic capacitors
10.
Flip the PCB over and solder all four pots on the other side.
Sockets PCB assembly
Place all sockets on the PCB, then place the panel over them. This will
assure that the sockets are correctly positioned. Flip the whole lot over
and solder the sockets into place.
