28
necessary to capture them (take pictures); it will help the insurance company, the
manufacturer, and the customer to establish causes of the violation.
13.
TESTING
Each refrigerated cabinet is factory tested. During the testing, the following checks
are carried out:
•
Hermetic tightness.
•
Pressure tests of the freezing coil.
•
Checks of electrical installation.
•
Load tests.
After the serve-over are installed, each serve-over and the overall system must be
inspected before their start-up.
14.
ACCESSORIES
Variety of special accessories available on request, such as: partitions, tabs, price
holders, a drainage collection tub, evaporation baths, safety bumpers, etc. For more
information, please call FREOR LT or sales partner.
15.
TECHNICAL DATA
15.1.
Electrical layouts
The layouts are in the electrical console.
15.2.
Failures and troubleshooting
Repair of the internal freezing coil of the showcase, check the
refrigerant amount and replacement of parts may only be carried out
by a specialist qualified to work with F and OAM gases.
Only an electrician with the respective qualification may carry out
inspection and repair of electrical installation.
Description of controller errors can be found in the instructional manual of the
controller manufacturer.
Содержание VEGA SPACE QB
