26
8.3.
Cleaning
The freezer must be regularly cleaned as food products are sensitive to bacteria and
microorganisms. Also, the packaging of displayed products may be damaged, liquid
products may damage the metal parts of the freezer and small products can enter
drainage openings and affect condensate drainage.
Regular cleaning:
•
The freezers should be cleaned at least once a week. If needed, when damaged
packaging is detected, the cabinets must be cleaned more often.
•
During cleaning, the internal space, shelves, interior and exterior plastic and
glass parts of the freezers must be thoroughly cleaned as well as the floor at the
freezers must be washed.
•
Washing of the plastic parts must be performed using warm water and a non-
abrasive cleaning agent purposed for plastics.
•
Metal components must be cleaned using warm water and a non-aggressive,
corrosion-free cleaning agent. After washing, it is necessary to remove any
moisture residue and to dry up the surface. Chromed surfaces must be cleaned
with special cleaning agents. After cleaning, they must be dried up with a soft
cloth that does not leave dust (linen, chamois and cotton).
•
Dyed components must be cleaned with liquid cleaning agents without abrasive
materials. It is recommended to use special detergents purposed for dyed
surfaces. After washing the surfaces must be well dried up. The paint damage
can cause metal corrosion at the scratch place.
•
Glass parts can be washed using the household window cleaning agents.
•
Some units of the furniture are with wooden finish. Wood and surfaces of
wooden products must be cleaned dry; also, wood polishers can be used. If
necessary, surfaces can be cleaned with a damp cloth and then dried thoroughly.
•
During cleaning, moisture cannot get on electrical installations.
•
It is necessary to regularly check drainage openings.
Sanitary day
General cleaning of the refrigerated furniture must be performed once in every 4
weeks. The freezer must be cleaned and disinfected to eliminate pathogenic
microorganisms.
•
Make sure that defrosting is in progress.
•
Remove the products from the serve-over, and temporarily place them in the
freezer compartment.
•
Disconnect electrical installations.
•
Remove the bottom shelves, air circulation grids, and evaporator covers.
•
Clean the ventilator of the serve-over from plaque. Remove foreign bodies from
the structures of the evaporator and ventilators.
Содержание VEGA SPACE QB
