14
4.
INSTALLATION
4.1.
Requirements for installation the freezer
Installation of the unit must be performed following next requirements:
•
The unit must be aligned horizontally (both depth and length) and installed in
the stable position.
•
Set up the unit only on the designated adjustable legs.
•
It is forbidden to install the unit close to any heating equipment or any HVAC
elements (air outlet etc.).
•
Keep a sufficient distance around the unit. It must be possible to open the doors
without any obstructions.
Fig. 7.
Example of unsuitable ambient conditions
Содержание VEGA SPACE QB
