freor VEGA QB HG, Руководство по эксплуатации

Страница: 28 / 36

28
10. DRAINAGE
10.1. Drainage system
Serve-over Vega QB LG / HG to be equipped with suitable drainage system. The
condensate can be drained to the tub trough the drainage siphon.
Also, condensate drainage can be connected to the common sewerage system.
Drainage connection points are indicated in the furniture layouts. It is necessary to
check the condensate collection tub to prevent it from the entry of food remains,
sand or larger dust particles.
11. MAINTENANCE
11.1. Information on temperatures
Before uploading the products into the serve-over, it is necessary to set the
temperature to maintain in the internal space of the serve-over. The temperature is
set in control. The temperature should be suitable for display of foreseen products.
Recommended temperatures are listed in chapter 2.10. The actual temperature is
shown in the thermometer of the serve-over. If the actual temperature is higher than
that set in the control, reduce the temperature in the control. Products must be
uploaded into the cooled inner space of the serve-over.
11.2. Defrosting
Warm ambient air can get into the serve-over. It is very likely when the showcase is
without doors or its door left open. Due to it, the evaporator can frost. Evaporators
must be regularly defrosted using programs set in the control. During the defrosting
refrigeration is not run.
11.3. Cleaning
The serve-over must be regularly cleaned, as food products are sensitive to bacteria
and microorganisms.
Regular cleaning:
• The serve-over must be cleaned at least once a week. If needed, when
contamination is detected, the serve-over must be cleaned more often.
• Serve-over inner space, shelves, interior and exterior plastic, and glass parts of
the serve-over must be thoroughly cleaned as well as the floor where the serve-
over is installed, must be washed.
• Washing of the plastic parts must be performed using warm water and a non-
abrasive cleaning agent dedicated for plastics.
• Metal components must be cleaned using warm water and a non-aggressive,
corrosion-free cleaning agent. After washing, it is necessary to remove any