freor JUPITER H8, Руководство по эксплуатации

Страница: 15 / 44

15
5. INSTALLATION
5.1. Requirements for installation the multideck
Installation of the unit must be performed following next requirements:
• The unit must be aligned horizontally (both depth and length) and installed in
the stable position.
• Set up the unit only on the designated adjustable legs.
•
It is forbidden to install the unit close to any heating equipment or any HVAC
elements (air outlet etc.).
• Keep a sufficient distance around the unit. It must be possible to open the doors
without any obstructions.
o
The exhaust air must be able to escape freely at the top of the unit.
o
Minimum clearance from ceiling 500 mm. Lower minimum clearance must
be approved by the manufacturer.
o
Superstructures or false ceilings directly on top of the unit should only be
installed after consultation with the manufacturer.
• To allow warm air to escape, there must be a gap of at least 150 mm between
the ceiling and all hanging billboards. Lower minimum gap only in agreement
with the manufacturer.
Fig.7. Example of unsuitable ambient conditions