freightliner PX113064S T 2016, Руководство пользователя

Страница: 51 / 236

Emergency High-Voltage
Disconnect Button
The driver may need to shut down the high-voltage
system in case of fire, submersion, accident, or other
emergency.
Pressing the red emergency high-voltage disconnect
button shown in
Fig. 4.4, also called the eStop
button, immediately disables the high-voltage system
by stopping the flow of power to and from the high-
voltage batteries.
The eStop button is surrounded by a yellow switch
guard to protect it from being inadvertently pressed.
Affixing a lock through the yellow switch guard stops
the red button from popping out after it is
intentionally pressed.
To release the button and resume the flow of power,
remove any attached lock and spin the button to
either the left or right.
Exterior Lighting Controls
Exterior lamps may be controlled by vehicle inputs or
switches or both. Some lamps only function when
other lamps are on.
Dash-mounted switches are backlit to illuminate both
the text and icon on the switch. Press the upper half
of the switch to turn the desired lamp(s) on or off.
Exterior Lights
Headlights
The headlight switch is a rotary switch located to the
left of the steering column, above the ignition switch.
See
Fig. 4.5 .
Automatic Headlights
The ’A’ mark on the headlight switch stands for
automatic. If the headlight switch is set to automatic,
all exterior lights and the low-beam headlights will
illuminate when the outside light decreases to a pre-
set level. This level is measured by the rain-light
sensor mounted at the top center of the windshield.
High-Beam Headlights
NOTE: The keyswitch must be ON for the high-
beam headlights to work.
With the low-beam headlights on, push the turn-
signal lever shown in
Fig. 4.6 toward the hood to
turn the high-beam headlights on. When the high-
beam headlights are on, a blue telltale illuminates on
the instrument cluster.
To turn off the high-beam headlights, pull the lever to
the middle position.
To momentarily flash the high-beam headlights while
the low-beam headlights are on, pull the lever
towards you.
Intelligent High-Beam Headlights
The intelligent high-beam headlight feature activates
when the headlight switch is in the ’A’ position and
the turn signal lever is pushed away from the driver
in the high-beam position.
When a vehicle approaches from the opposite
direction, the rain/light sensor registers their
headlights and deactivates the high-beam headlights
and activates the low-beam headlights.
f270164b 05/03/2022
0
1
2
3
0. Off
1. Low
2. Medium
3. High
Fig. 4.2, Multifuntional Stalk Switch Positions,
Recuperative Braking
f612065 04/22/2022
Fig. 4.3, Recuperative Braking Telltale
Driver Controls
4.2