freightliner PX113064S T 2016, Руководство пользователя

Страница: 185 / 236

Ball Point Ink
Ball point ink can sometimes be removed if rubbed
immediately with a damp cloth, using water or
rubbing alcohol. If this does not work, try the
procedure used for sulfide stains.
Miscellaneous
If stains do not respond to any of the treatments
described above, it is sometimes helpful to expose
the vinyl to direct sunlight for up to 30 hours.
Mustard, ball point ink, certain shoe polishes, and
dyes often bleach out in direct sunlight, leaving the
vinyl undamaged.
Washing and Polishing the
Cab
IMPORTANT: Carefully read all instructions
before using or applying any cleaner or product
on the vehicle or components. Failure to follow
manufacturers’ recommendations can result in
damage to the finish.
WARNING
Do not power wash or steam clean in the area of
vehicle electrical components, unless specified
by vehicle manuals or service literature. Power
washing and steam cleaning can cause
corrosion, permanently damaging these
components, which could result in fire, personal
injury, or property damage.
Protecting Your Vehicle’s Finish
To protect the finish of your new vehicle, follow these
guidelines carefully.
•
During the first 30 days, rinse your vehicle
frequently with water. If the vehicle is dirty, use
a mild liquid soap. Do not use detergent.
•
During the first 30 days, do not use anything
abrasive on your vehicle. Brushes, chemicals,
and cleaners may scratch the finish.
•
During the first 120 days, do not wax your
vehicle.
Keeping Your Vehicle Looking New
To extend the life of your vehicle’s finish, follow these
guidelines:
•
Avoid washing your vehicle in the hot sun.
•
Always use water. After the cab is completely
washed, dry it with a towel or chamois.
•
Do not dust painted surfaces with a dry cloth,
as this will scratch the paint.
•
Do not remove ice or snow from a painted
surface with a scraper of any sort.
•
To prevent damage to the finish, wax it
regularly. Before waxing, if the finish has
become dull, remove oxidized paint using a
cleaner specifically designed for this purpose.
Remove all road tar and tree sap before
waxing. Freightliner recommends that a quality
brand of cleaner or cleaner-polish and
polishing wax be used.
•
Do not let antifreeze stand on a painted
surface. If this should occur, rinse the surface
off with water.
•
To prevent rust, have any nicks or other
damage on the finish touched up as soon as
possible.
•
Park your vehicle in a sheltered area whenever
possible.
Protecting Vehicle Labeling
A majority of the labels applied to cab are required
for reasons of safety or identification. To prevent
delamination and deterioration of labels and stickers,
follow these guidelines carefully:
•
Do not pressure wash the label or sticker or
surfaces near it.
•
Do not use strong alkaline soaps on or near
the label or sticker.
Care of Exterior Lights
NOTICE
Do not use a power buffer, paper towels,
chemical solvents, or abrasive cleaners on the
headlight lens, all of which can remove the UV
coating from the surface, and result in yellowing
of the lens.
Clean the headlight lenses by hand only, using a
flannel cloth with mild, non-caustic soap or detergent,
and water.
Vehicle Appearance and Care
16.4