4.
Install the drain plugs and tighten securely.
5.
Add approximately 1 to 1-1/2 pints (0.5 to 0.7 L)
of oil (80/90 hypoid gear oil) to each hub.
6.
Rotate the wheels, allow the oil to settle, and
check the levels.
IMPORTANT: Fill the hubs to the level indicators
on the hub caps, or to no more than 1/4 inch (6
mm) above the indicators.
7.
Install the filler caps securely.
8.
Remove the chocks from the tires.
33–07 Wheel Bearing
Removing, Cleaning,
Checking, Repacking,
and Adjusting
See Group 33 of the
School Bus Chassis Workshop
Manual
for wheel bearing service procedures.
Front Axle
33
School Bus Chassis Maintenance Manual, July 2003
33/4